Why I think any serious DIYer should have an air compressor
If you are the type of person that considers themselves a serious DIYer, then you should definitely have an air compressor on hand for any projects that may arise. In fact, if you have one, you are able to finish home improvements much quicker and ease physical labor demands. The best part is that these tools are often easy to acquire, either through a loan exchange program for tools, home improvement warehouse or rental company for equipment.
One of the core benefits is how user friendly these tools are. With typically on/off switches, they allow you to have professional devices with only novice experience in many instances. With these power tools, you are able to generate more power than is possible simply by hand.
There are lots of reasons to have an air compressors and many ways to use them, including spray painting and to power pneumatic equipment as prime examples that are more demanding physically. Air compressors can also be utilized for inflating tires or even cleaning the grime off of a dirty laptop keyboard.
There are many advantages to be had from having your very own air compressor. They include…
With your own air compressor, you don’t have to worry about electric shock since air tools use no electricity and their air motors do not generate sparks. Additionally, you won’t have to rely on flammable chemicals to clean metals before welding. And liquids can easily ignite via stripped electrical cords.
Once you have an air compressor, you of course will increase your productivity and meet your goals at an accelerated rate. If working at a faster rate is one of your top priorities, then investing in an air compressor is a no-brainer.
Read more about the home maintenance tips and learn more about the top quality 12v air compressors around
Luckily, new technology is always increasing the speed rates which means that consumers get the full benefit from the better equipment that is offered on the market. There are tons of great air compressors available these days that can get the job done and not cost an arm and a leg. Two great examples of air compressors to consider investing in are:
CA Air 5510SE
With its wheeled design, reduced noise output, and one-hand hose connection, the California Air 5510SE stands head and shoulders above the competition and it can be used in stationary positions, it can be wheeled around your house, or it can even be moved from one jobsite to another, making it one of the most convenient options to consider.
Searching for the quietest air compressors? Click this page to find out.
Less than 6 gallons, it holds about half a gallon less than others on the market, but that’s nothing to complain about as there is no noise once it is switched on for a refill. For some users, the PSI reaches only to 120 maximum and they may be expecting the power of a larger unit, but for most people this model is big enough and powerful enough to use all of their tools, the same as they would with a six-gallon option.
With its higher rating on the PSI scale and the low level of noise that it produces, the Dewalt DWFP55126 is an impressive air compressor that provides everything you may be looking for in a model and truly has been constructed to push the limits of what is possible for a six-gallon range option. With the PSI a bit elevated in this air compressor, you are able to operate in ways that others with six gallons cannot.
One of the most impressive aspects of the Dewalt is its sanding ability when tested against other compressors. For those that are looking for an air compressor that has more power, you may want to look at more products and invest in a larger compressor that is stationary since having more PSI will not necessarily make up for the size of the tank.
Through the sanding tests, reviewers discovered the powerhouse capability of this Dewalt model, however, it is a bit too small for running air hogging equipment. The noise level that is registers on is on the higher side, making ear plugs necessary, but it is still not as loud as some models and a great investment option.
Take a look at the best portable air compressor reviews and find out the top small, portable, compact models for this year.
I just got a plasma cutter! Here’s why I’m so excited
Now that I’ve gotten a new plasma cutter, I cannot wait to get started on a project. With this much more now in my hands, I am eager to see how I can wield it and what I can produce. I’m not the most familiar person with plasma cutters, but I have learned quite a bit recently and am eager to learn even more.
With a plasma cutter at my side, I can add extreme precision to metalwork as I will be able to now cut through even the thickest of metals and use it in more ways. The best part about plasma cutters is that the cutting is nice and easy, with little debris after a day from school and the parts a that are not used are not normally given to anyone else.
Unbeknownst to most people, it is not as difficult as most think to operate a plasma cutter that is a handheld option. The most important element is choosing a machine that most suits your application and right accessories. Once you get started, I promise that you will be hooked. Those that end up using a handheld plasma cutter never go back to oxy-acetylene or mechanical cutting processes like shears, snips, and saw.
To learn more about the top 110v, small, cheap and handheld models on the market, read here and check it out today.
Once you get started, one of the best benefits of having your own plasma cutter is the increased productivity and the more affordable cutting costs. Not only do they cut faster and don’t require pre-heat cycles, cuts any metals conducting electricity, minimizes heat-affected zones, and can yield a cut. Plasma units are also gouged, beveled, pierced, and trace shapes. Some of the first questions I thought to ask when I selected my plasma cutter were:
- How thick is the metal going to be that I cut routinely?
- What is the thickest metal I will likely cut?
- How fast will I be able to cut?
Similar to welding machines, plasma cutters have their size determined by both voltage and amperage capacities. It is import to note a plasma process necessitates higher voltage and lower amperage levels and many people make the mistake of assuming plasma chines should be judged only on its amperage levels.
Although this is a crucial component and indicator, the output power is voltage times amperage. I did my own math to get the most accurate comparison of products possible.
Now that I know cutting speeds for the metal’s thickness, I am able to calculate the production rates rather easily, and usually in the parts each hour. These days, you can acquire cutting speed charts from manufacturers where you can compare and contrast the cutting speed. There is currently no universal standard, but the three things to adhere to are sever, quality, and rated cuts.
The better the rating of the quality cut, the thicker material the operator is able to cut, but this must be done at a much slower rate.
This means that the operator pushes the machine to reach the maximum thickness, with cutting speeds slow and significant clean-up required. As the material thins, the cutting speeds tend to increase dramatically.
Since plasma cutting requires electricity and air as its most basic elements, I had to ask myself the availability of the input power I would need. Many plasma cutters operate on 115 or 230 volts of power. Once you know what your markers are, it is easy to be able to select what is best for your device.
For times when I am in areas with lots of metal and dust shavings, machines that carry WindTunnel Technology are more reliable and you are assured that cool air flows through the machine and doesn’t blow into the electronic components. With the Fan-On-Demand system, the cooling fan only operates as needed to reduce flying debris from going into the unit.
For more reviews on the best plasma cutters around, go to this page.
There are few plasma cutters that can compare to this model, which can cut through half an inch of steel at up to 20 inches each minute the entire day. It is quite expensive but considering how efficient it is compared to other models, it is well worth the investment.
Yet another powerhouse entry is the Miller Spectrum 625, which has earned a reputation in the industry as one of the most reliable and solidly constructed options on the market. In addition to their plasma cutters, the company also has an extensive and impressive range of welding equipment.
Their plasma cutter is available in either 110 or 220 volts of power which enables them to be used anywhere. Compared to other models it operates at the top of the field and is highly regarded by industry professionals.
Drop by at plasmacutters.reviews and find out the top plasma cutter brands available on the market.