I just got a plasma cutter! Here’s why I’m so excited

Now that I’ve gotten a new plasma cutter, I cannot wait to get started on a project. With this much more now in my hands, I am eager to see how I can wield it and what I can produce. I’m not the most familiar person with plasma cutters, but I have learned quite a bit recently and am eager to learn even more.

With a plasma cutter at my side, I can add extreme precision to metalwork as I will be able to now cut through even the thickest of metals and use it in more ways. The best part about plasma cutters is that the cutting is nice and easy, with little debris after a day from school and the parts a that are not used are not normally given to anyone else.

Unbeknownst to most people, it is not as difficult as most think to operate a plasma cutter that is a handheld option. The most important element is choosing a machine that most suits your application and right accessories. Once you get started, I promise that you will be hooked. Those that end up using a handheld plasma cutter never go back to oxy-acetylene or mechanical cutting processes like shears, snips, and saw.

To learn more about the top 110v, small, cheap and handheld models on the market, read here and check it out today.

Once you get started, one of the best benefits of having your own plasma cutter is the increased productivity and the more affordable cutting costs. Not only do they cut faster and don’t require pre-heat cycles, cuts any metals conducting electricity, minimizes heat-affected zones, and can yield a cut. Plasma units are also gouged, beveled, pierced, and trace shapes. Some of the first questions I thought to ask when I selected my plasma cutter were:

  • How thick is the metal going to be that I cut routinely?
  • What is the thickest metal I will likely cut?
  • How fast will I be able to cut?

Similar to welding machines, plasma cutters have their size determined by both voltage and amperage capacities. It is import to note a plasma process necessitates higher voltage and lower amperage levels and many people make the mistake of assuming plasma chines should be judged only on its amperage levels.

Although this is a crucial component and indicator, the output power is voltage times amperage. I did my own math to get the most accurate comparison of products possible.

Now that I know cutting speeds for the metal’s thickness, I am able to calculate the production rates rather easily, and usually in the parts each hour. These days, you can acquire cutting speed charts from manufacturers where you can compare and contrast the cutting speed. There is currently no universal standard, but the three things to adhere to are sever, quality, and rated cuts.

Quality Cut

The better the rating of the quality cut, the thicker material the operator is able to cut, but this must be done at a much slower rate.

Sever Cut

This means that the operator pushes the machine to reach the maximum thickness, with cutting speeds slow and significant clean-up required. As the material thins, the cutting speeds tend to increase dramatically.

Primary Power

Since plasma cutting requires electricity and air as its most basic elements, I had to ask myself the availability of the input power I would need. Many plasma cutters operate on 115 or 230 volts of power. Once you know what your markers are, it is easy to be able to select what is best for your device.

Dirty Environments

For times when I am in areas with lots of metal and dust shavings, machines that carry WindTunnel Technology are more reliable and you are assured that cool air flows through the machine and doesn’t blow into the electronic components. With the Fan-On-Demand system, the cooling fan only operates as needed to reduce flying debris from going into the unit.

For more reviews on the best plasma cutters around, go to this page.

Hypertherm Powermax45

There are few plasma cutters that can compare to this model, which can cut through half an inch of steel at up to 20 inches each minute the entire day. It is quite expensive but considering how efficient it is compared to other models, it is well worth the investment.

Miller Spectrum

Yet another powerhouse entry is the Miller Spectrum 625, which has earned a reputation in the industry as one of the most reliable and solidly constructed options on the market. In addition to their plasma cutters, the company also has an extensive and impressive range of welding equipment.

Their plasma cutter is available in either 110 or 220 volts of power which enables them to be used anywhere. Compared to other models it operates at the top of the field and is highly regarded by industry professionals.

Drop by at plasmacutters.reviews and find out the top plasma cutter brands available on the market.